Doors for single piece system cleanrooms

Doors for Dagard’s single piece system cleanrooms

For all your cleanrooms consisting of a single piece system, we offer sliding doors and service doors adapted to your conditions of use.

Sandwich panel for a one-piece door

Tight sliding doors for cleanrooms with a single piece system

Easily cleanable, our sliding door is suitable for cleanrooms whatever their class. Its floor guides and lip seal have been designed for optimal cleanability. 

On the construction side, the sliding door frame is flush with the partition. The leaf (40 mm) consists of an aluminium honeycomb core inserted between two metal facings made of smooth galvanised steel sheet covered with an epoxy-polyester powder paint, oven-cured (colour according to colour chart). 

For more information, please do not hesitate to contact us.

 

Sandwich panel for a service door

Service doors for cleanrooms with single piece system

We offer a range of 3 service doors to meet different cleanroom needs: the bi-flush door, the single-flush door and the semi-flush door.

  • The semi-flush door: This is a service door with an semi-flush frame on both sides of the wall. The leaf is made of a rockwool or aluminium honeycomb core glued between two metal facings.
  • The single flush door: This is a service door with a flush frame on both sides of the wall. The flush door leaf, on one side of the frame, is made of an aluminium honeycomb core, or rock wool, glued between two metal facings.
  • The bi-flush door: This is a service door with a flush frame on both sides of the wall. The bi-flush leaf consists of an aluminium honeycomb or rock wool core glued between two metal facings

For more information, do not hesitate to contact us.